← Back to Blog
News

Google Flow's New Models: Omni 1.2, 15-Second Clips, and What Leaves on December 5

November 13, 2026·6 min read·By amine.smpc

Google Flow changed its model menu in early November 2026. A new video model, Omni 1.2 Flash, arrived with a length slider instead of fixed durations, and three models are marked "Leaving Dec 5". If you run batches on Flow, some of your saved settings will stop working that day. We read every number below off Flow's own menus on our account on November 7; Flow changes often and accounts differ, so check your own menu before relying on a figure.

Open the settings chip under the prompt box, switch to Video, and the model menu lists five models:

ModelLengthResolutionStatus
Omni 1.2 Flash3–15 s, any whole second360p or 720pNew
Omni 1.1 Flash4, 6, 8 or 10 s360p or 720pLeaving Dec 5
Veo 3.1 - LiteFixed 8 sFixed 720pStaying
Veo 3.1 - FastFixed 8 sFixed 720pLeaving Dec 5
Veo 3.1 - QualityFixed 8 sFixed 720pLeaving Dec 5

Some accounts also see Veo 3.1 - Lite [Lower Priority], a slower queue for the same model. If you have it, it is a different menu entry from plain Lite, so a saved workflow that names one will not silently use the other.

What is new in Omni 1.2 Flash

The headline change is length. Omni 1.1 offers four buttons, 4, 6, 8 and 10 seconds. Omni 1.2 replaces them with a Length slider from 3 to 15 seconds in one-second steps, and the settings chip reads the result back, for example "Video · 720p · 12s". Two practical consequences:

  • Fewer cuts for dialogue. A line that needed two 8-second clips stitched together now fits in one 12- or 15-second clip, which keeps the voice and the framing continuous.
  • Switching back clamps the length. If you pick 15 s on Omni 1.2 and then choose Omni 1.1, Flow sets it to 10 s, the longest 1.1 allows. Check the chip after changing models.

Flow also stopped refusing long reference videos. When a video you attach is longer than the model accepts, Flow now generates from its opening seconds and says so: "Only the first N s of your video will be edited". If you rely on a reference that runs long, trim it yourself so you choose which part is used.

What it costs in credits

Omni 1.2 is roughly twice the price of Omni 1.1 for the same length at 720p:

Length at 720pOmni 1.1 FlashOmni 1.2 Flash
4 s7 credits12 credits
8 s12 credits24 credits
10 s15 credits30 credits
15 s—60 credits

Up to 10 seconds Omni 1.2 costs 3 credits a second; the step from 10 to 15 seconds doubles the price of the clip. For a long batch, decide per shot: a wide establishing shot rarely needs 15 seconds, a monologue often does.

What leaves on December 5

Omni 1.1 Flash, Veo 3.1 - Fast and Veo 3.1 - Quality all carry "Leaving Dec 5" in the menu. After that date a workflow, queue or saved preset that names one of them has to be pointed at a model that stays:

  • From Omni 1.1 Flash → Omni 1.2 Flash. Pick the length again: 1.2 has no 4/6/8/10 buttons.
  • From Veo 3.1 - Fast or Quality → Veo 3.1 - Lite for the same fixed 8-second, 720p clip, or Omni 1.2 if you want to choose the length.

Test a handful of your usual prompts on the new model before December 5 rather than after, while you can still compare against the old one side by side.

The image models changed too

In Image mode the menu now lists Nano Banana Pro, Nano Banana 2 Lite and Nano Banana 2.1. Imagen 4 and the plain Nano Banana 2 are gone. Older guides, including some of ours, mention ImageFX or Nano Banana 2; in today's Flow the equivalent is Image mode with Nano Banana 2.1 or Pro.

How to move your workflows

  1. List every place a model name is saved: Flow presets, AutoFlow queues, Studio workflows.
  2. Run three of your typical prompts on the replacement model and compare cost and look.
  3. For Omni 1.2, set a length per shot instead of one length for the whole batch.
  4. Keep one test project in Flow for this, so experiments do not mix with client work.

If you batch with AutoFlow, it sets the duration and resolution only on models that have them, compares Flow's settings chip with your settings before each prompt, and lets you pick Omni 1.2 lengths per run. The changelog lists each update as Flow changes.

Related guides